Size(AWG) |
Internal Diameter(mm) |
Wall Thickness(mm) |
Standard Package (M/Spool) |
|---|---|---|---|
AWG18 |
1.00±0.10 |
0.40±0.06 |
200 |
AWG16 |
1.30±0.10 |
0.40±0.06 |
200 |
AWG14 |
1.65±0.10 |
0.40±0.06 |
200 |
AWG12 |
2.10±0.15 |
0.40±0.06 |
200 |
AWG10 |
2.60±0.15 |
0.50±0.08 |
200 |
AWG8 |
3.30±0.15 |
0.50±0.08 |
200 |
AWG6 |
4.10±0.20 |
0.50±0.08 |
100 |
AWG4 |
5.20±0.20 |
0.50±0.08 |
100 |
AWG2 |
6.50±0.20 |
0.50±0.08 |
100 |
AWG0 |
8.30±0.30 |
0.50±0.08 |
100 |
3/8〃 |
9.50±0.40 |
0.50±0.08 |
100 |
7/16〃 |
11.10±0.40 |
0.50±0.08 |
100 |
1/ 2〃 |
12.70±0.40 |
0.50±0.08 |
100 |
Property |
Test Method |
Typical Performance |
|---|---|---|
Tensile strength(MPa) |
ASTM D 2671 |
≥10.4 |
Ultimate elongation(%) |
ASTM D 2671 |
≥200 |
Water absorption (%) |
ASTM D 570 |
≤0.5 |
Dielectric strength (kv/mm) |
ASTM D 149 |
≥15 |
Volume resistivity (Ω·cm) |
ASTM D 876 |
≥101 4 |
Yellow/Green stripped,flexible,flame-retardant.
|
Size (mm) |
Expanded |
After Recovery |
ROUND/FLAT |
Standard Package M/Spool |
|
|---|---|---|---|---|---|
|
Internal Diameter Min(mm) |
Internal Diameter Max(mm) |
Wall Thickness mm |
|||
|
1.0 |
1.5±0.3 |
0.7 |
0.28±0.10 |
Round |
200 |
|
1.5 |
2.0±0.3 |
0.9 |
0.30±0.10 |
Round |
200 |
|
2.0 |
2.5±0.3 |
1.0 |
0.35±0.10 |
Round |
200 |
|
2.5 |
3.0±0.3 |
1.3 |
0.36±0.10 |
Round |
200 |
|
3.0 |
3.5±0.4 |
1.5 |
0.38±0.10 |
Round |
200 |
|
3.5 |
4.0±0.4 |
1.8 |
0.40±0.10 |
Round |
200 |
|
4.0 |
4.5±0.4 |
2.0 |
0.45±0.10 |
Round |
200 |
|
4.5 |
5.0±0.4 |
2.3 |
0.45±0.10 |
Round |
100 |
|
5.0 |
5.5±0.4 |
2.5 |
0.45±0.10 |
Round |
100 |
|
6.0 |
6.5±0.4 |
3.0 |
0.50±0.10 |
Round |
100 |
|
7.0 |
7.5±0.4 |
3.5 |
0.50±0.10 |
Flat |
100 |
|
8.0 |
8.5±0.5 |
4.0 |
0.55±0.10 |
Flat |
100 |
|
9.0 |
9.5±0.5 |
4.5 |
0.55±0.10 |
Flat |
100 |
|
10.0 |
10.5±0.5 |
5.0 |
0.55±0.10 |
Flat |
100 |
|
11.0 |
11.5±0.5 |
5.5 |
0.60±0.10 |
Flat |
100 |
|
12.0 |
12.5±0.5 |
6.0 |
0.60±0.10 |
Flat |
100 |
|
13.0 |
13.5±0.5 |
6.5 |
0.60±0.10 |
Flat |
100 |
|
14.0 |
14.5±0.5 |
7.0 |
0.65±0.10 |
Flat |
100 |
|
15.0 |
15.5±0.6 |
7.5 |
0.70±0.10 |
Flat |
100 |
|
16.0 |
17.0±0.6 |
8.0 |
0.70±0.10 |
Flat |
100 |
|
17.0 |
17.5±0.6 |
8.5 |
0.70±0.10 |
Flat |
100 |
|
18.0 |
19.0±0.7 |
9.0 |
0.70±0.15 |
Flat |
100 |
|
20.0 |
22.0±0.7 |
10.0 |
0.75±0.15 |
Flat |
100 |
|
22.0 |
24.0±0.7 |
11.0 |
0.80±0.15 |
Flat |
100 |
|
25.0 |
26.0±0.7 |
12.5 |
0.90±0.15 |
Flat |
50 |
|
28.0 |
29.0±0.7 |
14.0 |
0.90±0.15 |
Flat |
50 |
|
30.0 |
31.5±0.7 |
15.0 |
0.95±0.15 |
Flat |
50 |
|
35.0 |
36.5±0.7 |
17.5 |
0.95±0.15 |
Flat |
50 |
|
40.0 |
41.5±0.7 |
20.0 |
1.00±0.20 |
Flat |
50 |
|
45.0 |
46.0±0.7 |
22.5 |
1.00±0.20 |
Flat |
25 |
|
50.0 |
51.0±0.7 |
25.0 |
1.00±0.20 |
Flat |
25 |
|
60.0 |
≥60.0 |
30.0 |
1.10±0.20 |
Flat |
25 |
|
70.0 |
≥70.0 |
35.0 |
1.20±0.20 |
Flat |
25 |
|
80.0 |
≥80.0 |
40.0 |
1.30±0.20 |
Flat |
25 |
|
90.0 |
≥90.0 |
45.0 |
1.50±0.20 |
Flat |
25 |
|
100.0 |
≥100.0 |
50.0 |
1.65±0.20 |
Flat |
25 |
|
120.0 |
≥120.0 |
60.0 |
1.70±0.20 |
Flat |
15 |
|
150.0 |
≥150.0 |
75.0 |
1.70±0.20 |
Flat |
15 |
|
180.0 |
≥180.0 |
90.0 |
1.75±0.20 |
Flat |
15 |
Size (mm) |
Expanded |
After Recovery |
ROUND/FLAT |
Standard Package M/Spool |
|
|---|---|---|---|---|---|
Internal Diameter Min(mm) |
Internal Diameter Max(mm) |
Wall Thickness mm |
|||
3.2 |
3.2 |
1.0 |
0.55±0.15 |
Round |
200 |
4.8 |
4.8 |
1.5 |
0.60±0.15 |
Round |
100 |
6.4 |
6.4 |
2.0 |
0.65±0.15 |
Round |
100 |
9.5 |
9.5 |
3.0 |
0.75±0.15 |
Flat |
50 |
12.7 |
12.7 |
4.0 |
0.75±0.20 |
Flat |
50 |
19.1 |
19.1 |
6.0 |
0.85±0.20 |
Flat |
50 |
25.4 |
25.4 |
8.0 |
1.00±0.20 |
Flat |
50 |
39 |
39 |
13.0 |
1.50±0.20 |
Flat |
50 |
Property |
Test Method |
Stantard |
Typical Performance |
|---|---|---|---|
Tensile strengtn(MPa) |
ASTM D2671 |
≥10.4 |
11.5 |
Elongation(%) |
ASTM D2671 |
≥300 |
450 |
Tensile strengtn after aging (MPa) |
UL224 158℃X168hr |
≥7.3 |
8.5 |
Elongation after aging(%) |
Ul224 158℃X168hr |
≥200 |
350 |
Dieletric strength(kV/mm) |
IEC 60243 |
≥15 |
17.5 |
Volume resistivity(Ω.cm) |
ASTM D876 |
≥1X101 4 |
2.5X101 4 |
Size |
As Supplied |
After Recovery |
Standard Package M/spool |
||
|---|---|---|---|---|---|
Inch |
mm |
Internal Diameter Min(mm) |
Internal Diameter Max(mm) |
Wall Thickness Nom(mm) |
|
3/64 |
0.6 |
0.9±0.2 |
0.50 |
0.22 |
200 |
|
0.8 |
1.1±0.2 |
0.65 |
0.28 |
200 |
1/16 |
1.0 |
1.5±0.2 |
0.85 |
0.32 |
200 |
|
1.5 |
2.0±0.2 |
1.00 |
0.35 |
200 |
3/32 |
2.0 |
2.5±0.2 |
1.30 |
0.38 |
200 |
|
2.5 |
3.0±0.2 |
1.50 |
0.40 |
200 |
1/8 |
3.0 |
3.5±0.2 |
1.80 |
0.42 |
200 |
|
3.5 |
4.0±0.2 |
2.00 |
0.50 |
200 |
|
4.0 |
4.5±0.2 |
2.30 |
0.55 |
200 |
3/16 |
4.5 |
5.0±0.2 |
2.5 |
0.55 |
100 |
|
5.0 |
5.5±0.2 |
3.0 |
0.55 |
100 |
1/4 |
6.0 |
6.5±0.2 |
3.5 |
0.60 |
100 |
5/16 |
7.0 |
7.5±0.3 |
4.0 |
0.60 |
100 |
|
8.0 |
8.5±0.3 |
4.5 |
0.60 |
100 |
3/8 |
9.0 |
9.5±0.3 |
5.0 |
0.60 |
100 |
|
10.0 |
10.5±0.3 |
5.5 |
0.60 |
100 |
|
11 |
11.5±0.3 |
6.0 |
0.65 |
100 |
1/ 2 |
12 |
12.5±0.3 |
6.5 |
0.65 |
100 |
|
13 |
13.5±0.3 |
7.0 |
0.70 |
100 |
|
14 |
14.5±0.3 |
7.5 |
0.70 |
100 |
5/8 |
15 |
15.5±0.4 |
8.0 |
0.70 |
100 |
|
16 |
16.5±0.4 |
8.5 |
0.80 |
100 |
|
17 |
17.5±0.4 |
9.0 |
0.80 |
100 |
3/4 |
18 |
19.0±0.5 |
10.0 |
0.80 |
100 |
|
20 |
21.0±0.5 |
11.0 |
0.90 |
50 |
|
22 |
23.0±0.5 |
12.5 |
0.90 |
50 |
1 |
25 |
26.0±0.5 |
14.0 |
0.95 |
50 |
|
28 |
29.0±0.5 |
15.0 |
1.00 |
50 |
30 |
31.5±1.0 |
17.5 |
1.00 |
50 |
|
|
35 |
36.5±1.0 |
20.0 |
1.00 |
50 |
40 |
41.5±1.0 |
22.5 |
1.00 |
50 |
|
|
45 |
46.0±1.0 |
25.0 |
1.00 |
25 |
Property |
Test Method |
Typical Performance |
|---|---|---|
Tensilestrength(MPa) |
ASTM D 2671 |
≥10.4 |
Ultimate elongation(%) |
ASTM D 2671 |
≥200 |
Voltage withstand |
2500V,60s |
No breakdown |
Volume resistivity(Ω·cm) |
ASTM D 876 |
≥1014 |
-23053/5
Class 1 and 3
Size |
As Supplied |
After Recovery |
Standard Package |
||
|---|---|---|---|---|---|
Inch |
mm |
Internal Diameter mm |
Internal Diameter mm |
Wall Thickness mm |
Spool Length M/spool |
3/64 |
1.0 |
≥1.20 |
≤0.60 |
0.41±0.10 |
200 |
1/16 |
1.5 |
≥1.60 |
≤0.80 |
0.43±0.10 |
200 |
3/32 |
2.5 |
≥2.40 |
≤1.20 |
0.51±0.10 |
200 |
1/8 |
3.0 |
≥3.20 |
≤1.60 |
0.51±0.10 |
200 |
3/16 |
4.5 |
≥4.80 |
≤2.40 |
0.51±0.10 |
100 |
1/4 |
6.0 |
≥6.40 |
≤3.20 |
0.64±0.10 |
100 |
3/8 |
9.0 |
≥9.50 |
≤4.80 |
0.64±0.10 |
100 |
1/2 |
12 |
≥12.7 |
≤6.40 |
0.64±0.10 |
100 |
3/4 |
18 |
≥19.1 |
≤9.50 |
0.76±0.15 |
100 |
1 |
25 |
≥25.4 |
≤12.7 |
0.89±0.15 |
50 |
5/4 |
32 |
≥32 |
≤15.9 |
0.89±0.15 |
50 |
3/2 |
38 |
≥38 |
≤19.1 |
1.00±0.15 |
50 |
2 |
50 |
≥51 |
≤25.4 |
1.15±0.15 |
25 |
3 |
75 |
≥76 |
≤38.1 |
1.27±0.20 |
25 |
4 |
100 |
≥102 |
≤50.8 |
1.40±0.20 |
25 |
5 |
120 |
≥125 |
≤63.5 |
1.40±0.25 |
25 |
Property |
Test Method |
Typical Performance |
|---|---|---|
Tensile strength(MPa) |
ASTM D 2671 |
≥10.4 |
Ultimate elongation(%) |
ASTM D 2671 |
≥200 |
Tensile strengthn after heat aged (Mpa) |
175℃X168h |
≥7.3 |
Ultimate elongation after heat aged (%) |
175℃X168h |
≥100 |
Longitudinal change(%) |
ASTM D 2671 |
|
Flammability |
ASTM D 2671 C method |
|
Voltage withstand |
UL 224,2500V,60s |
No breakdown |
Heat shock |
UL 224,250℃×4h |
No cracks,flowing or dripping |
Dielectric strength (kV/mm) |
ASTM D 149 |
≥15 |
Volume resistivity (Ω·cm) |
ASTM D 876 |
≥1014 |
-23053/5
Class 1 and 3
Size |
As Supplied |
After Recovery |
Standard Package |
||
|---|---|---|---|---|---|
Inch |
mm |
Internal Diameter mm |
Internal Diameter mm |
Wall Thickness mm |
Spool Length M/spool |
1/16 |
1.5 |
≥1.5 |
≤0.5 |
0.45±0.10 |
200 |
1/8 |
3.0 |
≥3.0 |
≤1.0 |
0.55±0.10 |
200 |
3/16 |
4.5 |
≥4.5 |
≤1.5 |
0.60±0.10 |
100 |
1/4 |
6.0 |
≥6.0 |
≤2.0 |
0.65±0.10 |
100 |
3/8 |
9.0 |
≥9.0 |
≤3.0 |
0.75±0.15 |
100 |
1/2 |
12.0 |
≥12.0 |
≤4.0 |
0.75±0.15 |
100 |
5/8 |
15.0 |
≥15.0 |
≤5.0 |
0.80±0.15 |
100 |
3/4 |
18.0 |
≥18.0 |
≤6.0 |
0.85±0.15 |
100 |
1 |
24.0 |
≥24.0 |
≤8.0 |
1.00±0.20 |
50 |
30.0 |
≥30.0 |
≤10.0 |
1.15±0.20 |
50 |
|
39.0 |
≥39.0 |
≤13.0 |
1.50±0.20 |
50 |
|
2 |
50.0 |
≥50.0 |
≤16.0 |
2.50±0.20 |
25 |
|
60.0 |
≥60.0 |
≤20.0 |
2.60±0.20 |
25 |
|
70.0 |
≥70.0 |
≤23.0 |
2.60±0.20 |
25 |
3 |
80.0 |
≥80.0 |
≤26.0 |
2.60±0.20 |
25 |
|
90.0 |
≥90.0 |
≤30.0 |
2.60±0.20 |
25 |
4 |
100 |
≥100.0 |
≤33.0 |
2.60 ±0.20 |
25 |
Property |
Test Method |
Typical Performance |
|---|---|---|
Tensile strength(MPa) |
ASTM D 2671 |
≥10.4 |
Ultimate elongation(%) |
ASTM D 2671 |
≥200 |
Tensile strength after heat aged (Mpa) |
175℃X168h |
≥7.3 |
Ultimate elongation after heat aged (%) |
175℃X168h |
≥100 |
Longitudinal change(%) |
ASTM D 2671 |
|
Flammability |
ASTM D 2671 C method |
|
Voltage withstand |
UL 224,2500V,60s |
No breakdown |
Heat shock |
UL 224,250℃×4h |
No cracks,flowing or dripping |
Dielectric strength (kV/mm) |
ASTM D 149 |
≥15 |
Volume resistivity (Ω·cm) |
ASTM D 876 |
≥1014 |
|
Size |
As Supplied |
After Recovery |
Standard Package |
||
|---|---|---|---|---|---|
|
Inch |
mm |
Internal Diameter mm |
Internal Diameter mm |
Wall Thickness mm |
Spool Length M/spool |
|
3/64 |
0.8 |
1.1±0.2 |
0.50 |
0.22 |
200 |
|
1/16 |
1.0 |
1.5±0.2 |
0.65 |
0.28 |
200 |
|
|
1.5 |
2.0±0.2 |
0.85 |
0.32 |
200 |
|
3/32 |
2.0 |
2.5±0.2 |
1.00 |
0.35 |
200 |
|
|
2.5 |
3.0±0.2 |
1.30 |
0.38 |
200 |
|
1/8 |
3.0 |
3.5±0.2 |
1.50 |
0.40 |
200 |
|
|
3.5 |
4.0±0.2 |
1.80 |
0.42 |
200 |
|
|
4.0 |
4.5±0.2 |
2.00 |
0.45 |
200 |
|
3/16 |
4.5 |
5.0±0.2 |
2.30 |
0.50 |
200 |
|
|
5.0 |
5.5±0.2 |
2.5 |
0.55 |
100 |
|
1/4 |
6.0 |
6.5±0.2 |
3.0 |
0.55 |
100 |
|
5/16 |
7.0 |
7.5±0.3 |
3.5 |
0.55 |
100 |
|
|
8.0 |
8.5±0.3 |
4.0 |
0.60 |
100 |
|
3/8 |
9.0 |
9.5±0.3 |
4.5 |
0.60 |
100 |
|
|
10.0 |
10.5±0.3 |
5.0 |
0.60 |
100 |
|
|
11.0 |
11.5±0.3 |
5.5 |
0.60 |
100 |
|
1/2 |
12.0 |
12.5±0.3 |
6.0 |
0.60 |
100 |
|
|
13.0 |
13.5±0.3 |
6.5 |
0.65 |
100 |
|
|
14.0 |
14.5±0.3 |
7.0 |
0.65 |
100 |
|
5/8 |
15.0 |
15.5±0.4 |
7.5 |
0.70 |
100 |
|
|
16.0 |
16.5±0.4 |
8.0 |
0.70 |
100 |
|
|
17.0 |
17.5±0.4 |
8.5 |
0.70 |
100 |
|
3/4 |
18.0 |
19.0±0.5 |
9.0 |
0.80 |
100 |
|
|
20.0 |
21.0±0.5 |
10.0 |
0.80 |
100 |
|
|
22.0 |
23.0±0.5 |
11.0 |
0.80 |
100 |
|
1 |
25.0 |
26.0±0.5 |
12.5 |
0.90 |
50 |
|
|
28.0 |
29.0±0.5 |
14.0 |
0.90 |
50 |
|
|
30.0 |
31.5±1.0 |
15.0 |
0.95 |
50 |
|
|
35.0 |
36.5±1.0 |
17.5 |
1.00 |
50 |
|
|
40.0 |
41.5±1.0 |
20.0 |
1.00 |
50 |
|
|
45.0 |
46.5±1.0 |
22.5 |
1.00 |
25 |
|
2 |
50.0 |
≥50 |
25.0 |
1.00 |
25 |
|
|
60.0 |
≥60 |
31.0 |
1.30 |
25 |
|
|
70.0 |
≥70 |
36.0 |
1.30 |
25 |
|
3 |
80.0 |
≥80 |
41.0 |
1.46 |
25 |
|
|
90.0 |
≥90 |
46.0 |
1.46 |
25 |
|
4 |
100.0 |
≥100 |
51.0 |
1.46 |
25 |
|
5 |
120.0 |
≥120 |
61 |
1.56 |
25 |
|
6 |
150.0 |
≥150 |
76 |
1.56 |
25 |
|
7 |
180.0 |
≥180 |
91 |
1.56 |
25 |
Property |
Test Method |
Typical Performance |
|---|---|---|
Tensile strength(MPa) |
ASTM D 2671 |
≥10.4 |
Ultimate elongation(%) |
ASTM D 2671 |
≥200 |
Tensile strength after heat aged (Mpa) |
158℃X168h |
≥7.3 |
Ultimate elongation after heat aged (%) |
158℃X168h |
≥100 |
Longitudinalchange(%) |
ASTM D 2671 |
|
Flammability |
ASTM D 2671 C method |
|
Dielectric strength (kV/mm) |
ASTM D 149 |
≥15 |
Volume resistivity (Ω·cm) |
ASTM D 876 |
≥1014 |
|
Size |
As Supplied |
After Recovery |
Standard Package |
||
|---|---|---|---|---|---|
|
Inch |
mm |
Internal Diameter mm |
Internal Diameter mm |
Wall Thickness mm |
Spool Length M/spool |
1/16 |
1.5 |
1.6±0.1 |
≤0.50 |
0.45±0.10 |
200 |
1/8 |
3.0 |
3.2±0.1 |
≤1.00 |
0.55±0.10 |
200 |
3/16 |
4.5 |
4.7±0.1 |
≤1.50 |
0.60±0.10 |
200 |
1/4 |
6.0 |
6.2±0.1 |
≤2.00 |
0.65±0.10 |
100 |
3/8 |
9.0 |
9.3±0.2 |
≤3.00 |
0.75±0.15 |
100 |
1/2 |
12.0 |
12.3±0.2 |
≤4.00 |
0.75±0.15 |
100 |
5/8 |
15.0 |
15.3±0.2 |
≤5.00 |
0.80±0.15 |
100 |
3/4 |
18.0 |
18.3±0.2 |
≤6.00 |
0.85±0.15 |
100 |
1 |
24.0 |
24.4±0.3 |
≤8.00 |
1.00±0.20 |
50 |
30.0 |
30.4±0.3 |
≤10.0 |
1.15±0.20 |
50 |
|
39.0 |
39.6±0.5 |
≤13.0 |
1.50±0.20 |
50 |
|
2 |
50.0 |
50.6±0.5 |
≤16.0 |
2.50±0.20 |
25 |
|
60.0 |
61.5±1.0 |
≤20.0 |
2.60±0.20 |
25 |
|
70.0 |
71.5±1.0 |
≤23.0 |
2.60±0.20 |
25 |
3 |
80.0 |
81.5±1.0 |
≤26.0 |
2.60±0.20 |
25 |
|
90.0 |
91.5±1.0 |
≤30.0 |
2.60±0.20 |
25 |
4 |
100.0 |
101.5±1.0 |
≤33.0 |
2.60±0.20 |
25 |
Property |
Test Method |
Typical Performance |
|---|---|---|
Tensile strength(MPa) |
ASTM D 2671 |
≥10.4 |
Ultimate elongation(%) |
ASTM D 2671 |
≥200 |
Tensile strength after heat aged (Mpa) |
158℃X168h |
≥7.3 |
Ultimate elongation after heat aged (%) |
158℃X168h |
≥100 |
Longitudinal change(%) |
ASTM D 2671 |
|
Flammability |
ASTM D 2671 C method |
|
Voltage withstand |
UL 224, 2500V, 60s |
No breakdown |
Dielectric strength (kV/mm) |
ASTM D 149 |
≥15 |
Volume resistivity (Ω·cm) |
ASTM D 876 |
≥101 4 |
|
Size |
As Supplied |
After Recovery |
Standard Package |
||
|---|---|---|---|---|---|
|
Inch |
mm |
Internal Diameter mm |
Internal Diameter Max mm |
Wall Thickness Nom mm |
Spool Length M/spool |
|
3/64 |
0.8 |
1.1±0.2 |
0.50 |
0.22 |
200 |
|
1/16 |
1.0 |
1.5±0.2 |
0.65 |
0.28 |
200 |
|
|
1.5 |
2.0±0.2 |
0.85 |
0.32 |
200 |
|
3/32 |
2.0 |
2.5±0.2 |
1.00 |
0.35 |
200 |
|
|
2.5 |
3.0±0.2 |
1.30 |
0.38 |
200 |
|
1/8 |
3.0 |
3.5±0.2 |
1.50 |
0.40 |
200 |
|
|
3.5 |
4.0±0.2 |
1.80 |
0.42 |
200 |
|
|
4.0 |
4.5±0.2 |
2.00 |
0.45 |
200 |
|
3/16 |
4.5 |
5.0±0.2 |
2.30 |
0.50 |
100 |
|
|
5.0 |
5.5±0.2 |
2.5 |
0.55 |
100 |
|
1/4 |
6.0 |
6.5±0.2 |
3.0 |
0.55 |
100 |
|
5/16 |
7.0 |
7.5±0.3 |
3.5 |
0.55 |
100 |
|
|
8.0 |
8.5±0.3 |
4.0 |
0.60 |
100 |
|
3/8 |
9.0 |
9.5±0.3 |
4.5 |
0.60 |
100 |
|
|
10.0 |
10.5±0.3 |
5.0 |
0.60 |
100 |
|
|
11.0 |
11.5±0.3 |
5.5 |
0.60 |
100 |
|
1/2 |
12.0 |
12.5±0.3 |
6.0 |
0.60 |
100 |
|
|
13.0 |
13.5±0.3 |
6.5 |
0.65 |
100 |
|
|
14.0 |
14.5±0.3 |
7.0 |
0.65 |
100 |
|
5/8 |
15.0 |
15.5±0.4 |
7.5 |
0.70 |
100 |
|
|
16.0 |
16.5±0.4 |
8.0 |
0.70 |
100 |
|
|
17.0 |
17.5±0.4 |
8.5 |
0.70 |
100 |
|
3/4 |
18.0 |
19.0±0.5 |
9.0 |
0.80 |
100 |
|
|
20.0 |
21.0±0.5 |
10.0 |
0.80 |
100 |
|
|
22.0 |
23.0±0.5 |
11.0 |
0.80 |
100 |
|
1 |
25.0 |
26.0±0.5 |
12.5 |
0.90 |
50 |
|
|
28.0 |
29.0±0.5 |
14.0 |
0.90 |
50 |
|
|
30.0 |
31.5±1.0 |
15.0 |
0.95 |
50 |
|
|
35.0 |
36.5±1.0 |
17.5 |
1.00 |
50 |
|
|
40.0 |
41.5±1.0 |
20.0 |
1.00 |
50 |
|
|
45.0 |
46.5±1.0 |
22.5 |
1.00 |
25 |
|
2 |
50.0 |
≥72 |
25.0 |
1.00 |
25 |
|
|
60.0 |
≥82 |
31.0 |
1.30 |
25 |
|
|
70.0 |
≥92 |
36.0 |
1.30 |
25 |
|
3 |
80.0 |
≥: 2 |
41.0 |
1.46 |
25 |
|
|
90.0 |
≥; 2 |
46.0 |
1.46 |
25 |
|
4 |
100.0 |
≥322 |
51.0 |
1.46 |
25 |
|
5 |
120.0 |
≥342 |
61.0 |
1.56 |
25 |
|
6 |
150.0 |
≥372 |
76.0 |
1.56 |
25 |
|
7 |
180.0 |
≥3: 2 |
91.0 |
1.56 |
25 |
Property |
Test Method |
Typical Performance |
Tensile strength(MPa) |
ASTM D 2671 |
≥10.4 |
Ultimate elongation(%) |
ASTM D 2671 |
≥200 |
Tensile strength after heat aged (Mpa) |
158℃X168h |
≥7.3 |
Ultimate elongation after heat aged (%) |
158℃X168h |
≥100 |
Longitudinal change(%) |
ASTM D 2671 |
|
Flammability |
ASTM D 2671 C method |
|
Dielectric strength (kV/mm) |
ASTM D 149 |
≥15 |
Volume resistivity (Ω·cm) |
ASTM D 876 |
≥1014 |
|
Size |
As Supplied |
After Recovery |
Standard Package |
||
|---|---|---|---|---|---|
|
Inch |
mm |
Internal Diameter mm |
Internal Diameter mm |
Wall Thickness mm |
Spool Length M/spool |
1/16 |
1.0 |
1.4±0.2 |
0.65 |
0.20 |
200 |
|
1.5 |
1.9±0.2 |
0.85 |
0.20 |
200 |
3/32 |
2.0 |
2.4±0.2 |
1.00 |
0.22 |
200 |
|
2.5 |
2.9±0.2 |
1.30 |
0.25 |
200 |
1/8 |
3.0 |
3.4±0.2 |
1.50 |
0.28 |
200 |
|
3.5 |
3.9±0.2 |
1.80 |
0.28 |
200 |
|
4.0 |
4.4±0.2 |
2.00 |
0.30 |
200 |
3/16 |
4.5 |
4.9±0.2 |
2.30 |
0.30 |
200 |
|
5.0 |
5.5±0.2 |
2.5 |
0.32 |
100 |
1/4 |
6.0 |
6.5±0.2 |
3.0 |
0.32 |
100 |
5/16 |
7.0 |
7.5±0.3 |
3.5 |
0.32 |
100 |
|
8.0 |
8.5±0.3 |
4.0 |
0.32 |
100 |
3/8 |
9.0 |
9.5±0.3 |
4.5 |
0.35 |
100 |
|
10.0 |
10.5±0.3 |
5.0 |
0.35 |
100 |
|
11.0 |
11.5±0.3 |
5.5 |
0.40 |
100 |
1/2 |
12.0 |
12.5±0.3 |
6.0 |
0.40 |
100 |
|
13.0 |
13.5±0.3 |
6.5 |
0.40 |
100 |
|
14.0 |
14.5±0.3 |
7.0 |
0.40 |
100 |
5/8 |
15.0 |
15.5±0.4 |
7.5 |
0.40 |
100 |
|
16.0 |
16.5±0.4 |
8.0 |
0.40 |
100 |
|
17.0 |
17.5±0.4 |
8.5 |
0.40 |
100 |
3/4 |
18.0 |
18.5±0.4 |
9.0 |
0.42 |
100 |
|
20.0 |
20.5±0.5 |
10.0 |
0.45 |
100 |
|
22.0 |
22.5±0.5 |
11.0 |
0.45 |
100 |
1 |
25.0 |
25.5±0.5 |
12.5 |
0.45 |
50 |
Property |
Test Method |
Typical Performance |
|---|---|---|
Tensile strength(MPa) |
ASTM D 2671 |
≥10.4 |
Ultimate elongation(%) |
ASTM D 2671 |
≥200 |
Tensile strength after heat aged (Mpa) |
158℃X168h |
≥7.3 |
Ultimate elongation after heat aged (%) |
158℃X168h |
≥100 |
Longitudinalchange(%) |
ASTM D 2671 |
|
Flammability |
ASTM D 2671 C method |
|
Dielectric strength (kV/mm) |
ASTM D 149 |
≥15 |
Volume resistivity (Ω·cm) |
ASTM D 876 |
≥1014 |
|
Size |
As Supplied |
After Recovery |
Standard Package |
||
|---|---|---|---|---|---|
|
Inch |
mm |
Internal Diameter mm |
Internal Diameter mm |
Wall Thickness mm |
Spool Length M/spool |
|
1/16 |
1.0 |
1.4±0.2 |
0.65 |
0.20 |
200 |
|
|
1.5 |
1.9±0.2 |
0.85 |
0.20 |
200 |
|
3/32 |
2.0 |
2.4±0.2 |
1.00 |
0.22 |
200 |
|
|
2.5 |
2.9±0.2 |
1.30 |
0.25 |
200 |
|
1/8 |
3.0 |
3.4±0.2 |
1.50 |
0.28 |
200 |
|
|
3.5 |
3.9±0.2 |
1.80 |
0.28 |
200 |
|
|
4.0 |
4.4±0.2 |
2.00 |
0.30 |
200 |
|
3/16 |
4.5 |
4.9±0.2 |
2.30 |
0.30 |
100 |
|
|
5.0 |
5.5±0.2 |
2.5 |
0.32 |
100 |
|
1/4 |
6.0 |
6.5±0.2 |
3.0 |
0.32 |
100 |
|
5/16 |
7.0 |
7.5±0.3 |
3.5 |
0.32 |
100 |
|
|
8.0 |
8.5±0.3 |
4.0 |
0.32 |
100 |
|
3/8 |
9.0 |
9.5±0.3 |
4.5 |
0.35 |
100 |
|
|
10.0 |
10.5±0.3 |
5.0 |
0.35 |
100 |
|
|
11.0 |
11.5±0.3 |
5.5 |
0.40 |
100 |
|
1/2 |
12.0 |
12.5±0.3 |
6.0 |
0.40 |
100 |
|
|
13.0 |
13.5±0.3 |
6.5 |
0.40 |
100 |
|
|
14.0 |
14.5±0.3 |
7.0 |
0.40 |
100 |
|
5/8 |
15.0 |
15.5±0.4 |
7.5 |
0.40 |
100 |
|
|
16.0 |
16.5±0.4 |
8.0 |
0.40 |
100 |
|
|
17.0 |
17.5±0.4 |
8.5 |
0.40 |
100 |
|
3/4 |
18.0 |
18.5±0.4 |
9.0 |
0.42 |
100 |
|
|
20.0 |
20.5±0.5 |
10.0 |
0.45 |
100 |
|
|
22.0 |
22.5±0.5 |
11.0 |
0.45 |
100 |
|
1 |
25.0 |
25.5±0.5 |
12.5 |
0.45 |
50 |
|
Property |
Test Method |
Typical Performance |
|---|---|---|
|
Tensile strength(MPa) |
ASTM D 2671 |
≥10.4 |
|
Ultimate elongation(%) |
ASTM D 2671 |
≥200 |
|
Tensile strength after heat aged (Mpa) |
158℃X168h |
≥7.3 |
|
Ultimate elongation after heat aged (%) |
158℃X168h |
≥100 |
|
Longitudinalchange(%) |
ASTM D 2671 |
|
|
Flammability |
ASTM D 2671 C method |
|
|
Dielectric strength (kV/mm) |
ASTM D 149 |
≥15 |
|
Volume resistivity (Ω·cm) |
ASTM D 876 |
≥1014 |
Size |
As Supplied |
After Recovery |
Standard Package |
||
|---|---|---|---|---|---|
Inch |
mm |
Internal Diameter mm |
Internal Diameter mm |
Wall Thickness mm |
Spool Length M/spool |
3/64 |
1.0 |
≥1.20 |
≤0.60 |
0.41±0.10 |
200 |
1/16 |
1.5 |
≥1.60 |
≤0.80 |
0.43±0.10 |
200 |
3/32 |
2.5 |
≥2.40 |
≤1.20 |
0.51±0.10 |
200 |
1/8 |
3.0 |
≥3.20 |
≤1.60 |
0.51±0.10 |
200 |
3/16 |
4.5 |
≥4.80 |
≤2.40 |
0.51±0.10 |
100 |
1/4 |
6.0 |
≥6.40 |
≤3.20 |
0.64±0.10 |
100 |
3/8 |
9.0 |
≥9.50 |
≤4.80 |
0.64±0.10 |
100 |
1/2 |
12 |
≥12.7 |
≤6.40 |
0.64±0.10 |
100 |
3/4 |
18 |
≥19.1 |
≤9.50 |
0.76±0.15 |
100 |
1 |
25 |
≥25.4 |
≤12.7 |
0.89±0.15 |
50 |
5/4 |
32 |
≥32 |
≤15.9 |
0.89±0.15 |
50 |
3/2 |
38 |
≥38 |
≤19.1 |
1.00±0.15 |
50 |
2 |
50 |
≥51 |
≤25.4 |
1.15±0.15 |
25 |
3 |
75 |
≥76 |
≤38.1 |
1.27±0.20 |
25 |
4 |
100 |
≥102 |
≤50.8 |
1.40±0.20 |
25 |
5 |
120 |
≥125 |
≤63.5 |
1.40±0.25 |
25 |
Property |
Test Method |
Typical Performance |
|---|---|---|
Tensile strength(MPa) |
ASTM D2671 |
≥10.4 |
Ultimate elongation(%) |
ASTM D2671 |
≥200 |
Tensile strength after heat aged (Mpa) |
180℃X168h |
≥7.3 |
Ultimate elongation after heat aged (%) |
180℃X168h |
≥100 |
Corrosion |
Ul224 |
Pass |
Flammability |
ASTM D 2671C method |
|
Voltage withstand |
2500V, 60s |
No breakdown |
Heat shock(%) |
250℃X4h |
No cracks, flowing or dripping |
Cold blend |
No cracks |
|
Dielectric strength (kv/mm) |
ASTM D 149 |
≥15 |
Volume resistivity (Ω·cm) |
ASTM D 876 |
≥101 4 |
Water absorption(%) |
UL 224 |
≤0.5 |
RSFRNH-BTM is made from specially formulated radiation cross-linked halogen free compounds. It can provide high resistance to tracking and arcing, as well as to enhance the insulation properties of bus-bar in switchgear and substation. Suitable for application in insulating medium voltage bus bars, cable termination and joints from 1KV to 24KV.
Property |
Test Method |
Standard Performance |
Typical Performance |
|---|---|---|---|
Tensile strength |
IEC 60684 |
≥8Mpa |
10.5 Mpa |
Elongation |
IEC 60684 |
≥400% |
550% |
Heat Aging tensile strength |
150 ╳ 168h℃ |
≥5Mpa |
9.5 Mpa |
Heat Aging elongation |
150℃╳168h |
≥200% |
450% |
Heat shock |
225℃ ╳ 4h |
no cracking or flowing |
no cracking or flowing |
Flammability |
IEC 60684 |
Passed |
Passed |
Low temperature Flexibility |
no cracking |
no cracking |
Property |
Test Method |
Standard Performance |
Typical Performance |
|---|---|---|---|
Dielectric Strength |
IEC 60684 |
≥20KV/mm |
23kv/mm |
Volume Resistivity |
IEC 60684 |
≥1×101 3 Ω•cm |
2×101 4 Ω•cm |
Tracking(2.5kv,60min) |
IEC 60684 |
no cracking |
no cracking |
Normal size (mm) |
As supplied/mm |
After recovered/mm |
Standard length m/Roll |
|
|---|---|---|---|---|
Inside diameter (Min) |
Inside diameter(Max) |
Wall thickness (Min) |
||
Φ20/6 |
20 |
6 |
2.2±0.3 |
25 |
Φ28/9 |
28 |
9 |
2.6±0.3 |
25 |
Φ33/10 |
33 |
10 |
2.8±0.3 |
25 |
Φ40/12 |
40 |
12 |
2.8±0.3 |
25 |
Φ45/14 |
45 |
14 |
3.0±0.3 |
25 |
Φ55/16 |
55 |
16 |
3.0±0.3 |
25 |
Φ65/19 |
65 |
19 |
3.0±0.3 |
25 |
Φ75/22 |
75 |
22 |
3.0±0.3 |
25 |
Φ85/25 |
85 |
25 |
3.2±0.3 |
25 |
Φ95/30 |
95 |
30 |
3.2±0.3 |
25 |
Φ115/34 |
115 |
34 |
3.3±0.3 |
25 |
Φ130/36 |
130 |
36 |
3.3±0.3 |
25 |
Φ160/50 |
160 |
50 |
3.3±0.3 |
25 |
Φ180/56 |
180 |
56 |
3.3±0.3 |
25 |
|
Product No. |
Busbar Width (square)/mm |
As Supplied/mm |
After Recovered/mm |
Standard Package (m/roll) |
||
|---|---|---|---|---|---|---|
|
ID (Min) |
Wall Thickness |
ID (Max) |
Wall Thickness |
|||
|
1kV WMPG 30 |
30 |
31.5±1.0 |
0.50±0.15 |
≤15 |
0.95±0.15 |
50 |
|
1kV WMPG 35 |
35 |
36.5±1.5 |
0.50±0.15 |
≤18 |
1.00±0.15 |
50 |
|
1kV WMPG 40 |
40 |
41.5±1.5 |
0.55±0.15 |
≤20 |
1.00±0.15 |
25 |
|
1kV WMPG 45 |
45 |
41.5±1.5 |
0.55±0.15 |
≤23 |
1.00±0.15 |
25 |
|
1kV WMPG 50 |
50 |
51.0±2.0 |
0.55±0.15 |
≤25 |
1.00±0.15 |
25 |
|
1kV WMPG 60 |
60 |
60.0±3.0 |
0.60±0.20 |
≤30 |
1.30±0.20 |
25 |
|
1kV WMPG 65* |
65 |
65.0±3.0 |
0.60±0.20 |
≤33 |
1.30±0.20 |
25 |
|
1kV WMPG 70 |
70 |
70.0±3.0 |
0.65±0.20 |
≤35 |
1.30±0.20 |
25 |
|
1kV WMPG 75* |
75 |
75.0±3.0 |
0.65±0.20 |
≤38 |
1.30±0.20 |
25 |
|
1kV WMPG 80 |
80/100 |
80.0±3.0 |
0.65±0.20 |
≤40 |
1.46±0.20 |
25 |
|
1kV WMPG 85* |
80/100 |
85.0±3.0 |
0.65±0.20 |
≤43 |
1.46±0.20 |
25 |
|
1kV WMPG 90 |
100 |
90.0±4.0 |
0.65±0.20 |
≤45 |
1.46±0.20 |
25 |
|
1kV WMPG 100 |
100/120 |
100.0±4.0 |
0.65±0.20 |
≤50 |
1.46±0.20 |
25 |
|
1kV WMPG 120 |
150 |
120.0±4.0 |
0.65±0.20 |
≤60 |
1.46±0.20 |
25 |
|
1kV WMPG 150 |
180 |
150.0±4.0 |
0.65±0.20 |
≤75 |
1.46±0.20 |
25 |
|
1kV WMPG 180 |
MAX |
180.0±4.0 |
0.65±0.20 |
≤90 |
1.46±0.20 |
25 |
|
1kV WMPG 210* |
MAX |
210.0±4.0 |
0.65±0.20 |
≤105 |
1.46±0.20 |
25 |
|
1kV WMPG 230* |
MAX |
230.0±4.0 |
0.65±0.20 |
≤115 |
1.46±0.20 |
25 |
|
1kV WMPG 250* |
MAX |
250.0±5.0 |
0.65±0.20 |
≤125 |
1.46±0.20 |
25 |
|
1kV WMPG 300* |
MAX |
300.0±5.0 |
0.65±0.20 |
≤150 |
1.46±0.20 |
25 |
|
Product No. |
Busbar Width (square/circular)/mm |
As Supplied/mm |
After Recovered/mm/mm |
Standard Package (m/roll) |
||
|---|---|---|---|---|---|---|
|
ID (Min) |
Wall Thickness |
ID (Max) |
Wall Thickness |
|||
|
10kV WMPG 15/8 |
15/12 |
15.0±0.8 |
1.20±0.30 |
≤8 |
2.10±0.30 |
25 |
|
10kV WMPG 20/10 |
20/15 |
20.0±0.8 |
1.20±0.30 |
≤10 |
2.10±0.30 |
25 |
|
10kV WMPG 25/12 |
25/18 |
25.0±0.8 |
1.20±0.30 |
≤12.5 |
2.10±0.30 |
25 |
|
10kV WMPG 30/15 |
32/20 |
30.0±0.8 |
1.20±0.30 |
≤15 |
2.10±0.30 |
25 |
|
10kV WMPG 40/20 |
40/30 |
40.0±1.0 |
1.20±0.30 |
≤20 |
2.30±0.30 |
25 |
|
10kV WMPG 50/25 |
50/35 |
50.0±3.0 |
1.20±0.30 |
≤25 |
2.30±0.30 |
25 |
|
10kV WMPG 60/30 |
60/45 |
60.0±3.0 |
1.20±0.30 |
≤30 |
2.30±0.30 |
25 |
|
10kV WMPG 65/33* |
65/45 |
65.0±3.0 |
1.20±0.30 |
≤33 |
2.30±0.30 |
25 |
|
10kV WMPG 70/35 |
70/50 |
70.0±3.0 |
1.20±0.30 |
≤35 |
2.30±0.30 |
25 |
|
10kV WMPG 75/38* |
75/50 |
75.0±3.0 |
1.20±0.30 |
≤38 |
2.30±0.30 |
25 |
|
10kV WMPG 80/40 |
80/55 |
80.0±3.0 |
1.20±0.30 |
≤40 |
2.30±0.30 |
25 |
|
10kV WMPG 85/43* |
80/65 |
85.0±3.0 |
1.20±0.30 |
≤43 |
2.40±0.30 |
25 |
|
10kV WMPG 100/50 |
100/75 |
100.0±4.0 |
1.20±0.30 |
≤50 |
2.40±0.30 |
25 |
|
10kV WMPG 120/60 |
120/85 |
120.0±4.0 |
1.20±0.30 |
≤60 |
2.40±0.30 |
25 |
|
10kV WMPG 150/75 |
150/105 |
150.0±4.0 |
1.20±0.30 |
≤75 |
2.40±0.30 |
25 |
|
10kV WMPG 180/90 |
180/120 |
180.0±5.0 |
1.20±0.30 |
≤90 |
2.40±0.30 |
25 |
|
10kV WMPG 210/105* |
210/140 |
210.0±5.0 |
1.20±0.40 |
≤105 |
2.40±0.30 |
20 |
|
10kV WMPG 230/115* |
230/150 |
230.0±5.0 |
1.20±0.40 |
≤115 |
2.40±0.30 |
20 |
|
10kV WMPG 250/125* |
250/180 |
250.0±5.0 |
1.20±0.40 |
≤125 |
2.40±0.30 |
20 |
|
10kV WMPG 300/150* |
300/210 |
300.0±5.0 |
1.20±0.40 |
≤150 |
2.40±0.30 |
15 |
Product No. |
Busbar Width (square/circular)/mm |
As Supplied/mm |
After Recovered/mm |
Standard Package (m/roll) |
||
|---|---|---|---|---|---|---|
ID (Min) |
Wall Thickness |
ID (Max) |
Wall Thickness |
|||
20kV WMPG 15/8 |
15/12 |
15.0±0.8 |
1.30±0.30 |
≤8 |
2.50±0.20 |
25 |
20kV WMPG 20/10 |
20/15 |
20.0±0.8 |
1.30±0.30 |
≤10 |
2.50±0.20 |
25 |
20kV WMPG 25/13 |
25/18 |
25.0±0.8 |
1.30±0.30 |
≤13 |
2.50±0.20 |
25 |
20kV WMPG 30/15 |
32/20 |
30.0±0.8 |
1.30±0.30 |
≤15 |
2.50±0.20 |
25 |
20kV WMPG 40/20 |
40/30 |
40.0±1.0 |
1.40±0.40 |
≤20 |
2.80±0.30 |
25 |
20kV WMPG 50/25 |
50/35 |
50.0±2.0 |
1.40±0.40 |
≤25 |
2.80±0.30 |
25 |
20kV WMPG 60/30 |
60/45 |
60.0±3.0 |
1.40±0.40 |
≤30 |
2.80±0.30 |
25 |
20kV WMPG 65/33* |
65/45 |
65.0±3.0 |
1.40±0.40 |
≤33 |
2.80±0.30 |
25 |
20kV WMPG 70/35 |
70/50 |
70.0±3.0 |
1.40±0.40 |
≤35 |
2.80±0.30 |
25 |
20kV WMPG 75/38 |
75/50 |
75.0±3.0 |
1.40±0.40 |
≤38 |
2.80±0.30 |
25 |
20kV WMPG 80/40 |
80/55 |
80.0±3.0 |
1.40±0.40 |
≤40 |
2.80±0.30 |
25 |
20kV WMPG 85/43* |
80/65 |
85.0±3.0 |
1.40±0.40 |
≤43 |
2.80±0.30 |
25 |
20kV WMPG 100/50 |
100/75 |
100.0±4.0 |
1.40±0.40 |
≤50 |
2.80±0.30 |
25 |
20kV WMPG 120/60 |
120/85 |
120.0±4.0 |
1.40±0.40 |
≤60 |
2.80±0.30 |
25 |
20kV WMPG 150/75 |
150/105 |
150.0±4.0 |
1.40±0.40 |
≤75 |
2.80±0.30 |
25 |
20kV WMPG 180/90 |
180/120 |
180.0±5.0 |
1.40±0.40 |
≤90 |
2.80±0.30 |
25 |
20kV WMPG 210/105* |
210/40 |
210.0±5.0 |
1.40±0.40 |
≤105 |
2.80±0.30 |
20 |
20kV WMPG 230/115* |
230/150 |
230.0±5.0 |
1.40±0.40 |
≤115 |
2.80±0.30 |
20 |
Product No. |
Busbar Width (square)/mm |
As Supplied/mm |
After Recovered/mm |
Standard Package (m/roll) |
||
|---|---|---|---|---|---|---|
ID (Min) |
Wall Thickness |
ID (Max) |
Wall Thickness |
|||
35kV WMPG 30/15 |
30 |
30.0±1.0 |
1.90±0.50 |
≤15 |
4.00±0.30 |
15 |
35kV WMPG 35/18 |
30/40 |
35.0±1.0 |
1.90±0.50 |
≤18 |
4.00±0.30 |
15 |
35kV WMPG 40/20 |
40 |
40.0±1.0 |
1.90±0.50 |
≤20 |
4.00±0.30 |
15 |
35kV WMPG 50/25 |
50 |
50.0±2.0 |
1.90±0.50 |
≤25 |
4.00±0.30 |
15 |
35kV WMPG 60/30 |
60 |
60.0±3.0 |
1.90±0.50 |
≤30 |
4.00±0.30 |
15 |
35kV WMPG 65/33* |
60/70 |
65.0±3.0 |
1.90±0.50 |
≤33 |
4.00±0.30 |
15 |
35kV WMPG 70/35 |
70 |
70.0±3.0 |
1.90±0.50 |
≤35 |
4.00±0.30 |
15 |
35kV WMPG 75/38* |
70/80 |
75.0±3.0 |
1.90±0.50 |
≤38 |
4.00±0.30 |
15 |
35kV WMPG 80/40 |
80/100 |
80.0±4.0 |
1.90±0.50 |
≤40 |
4.00±0.30 |
15 |
35kV WMPG 100/50 |
100/120 |
100.0±4.0 |
1.90±0.50 |
≤50 |
4.00±0.30 |
15 |
35kV WMPG 120/60 |
150 |
120.0±4.0 |
1.90±0.50 |
≤60 |
4.00±0.30 |
15 |
35kV WMPG 150/75 |
180 |
150.0±4.0 |
1.90±0.50 |
≤75 |
4.00±0.30 |
15 |
35kV WMPG 180/90* |
MAX. |
180.0±5.0 |
1.90±0.50 |
≤90 |
4.00±0.30 |
15 |
35kV WMPG 210/105* |
MAX. |
210.0±5.0 |
1.90±0.50 |
≤105 |
4.00±0.30 |
15 |
35kV WMPG 230/115* |
MAX. |
230.0±5.0 |
1.90±0.50 |
≤115 |
4.00±0.30 |
15 |
35kV WMPG 250/125* |
MAX. |
250.0±5.0 |
1.90±0.50 |
≤125 |
4.00±0.30 |
15 |
35kV WMPG 300/150* |
MAX. |
300.0±5.0 |
1.90±0.50 |
≤150 |
4.00±0.30 |
15 |
Note: Size with * are not standard stock items.
Property |
Test Method |
Standard Value |
|---|---|---|
Tensile Strength |
GB/T 1040 |
≥8MPa |
Elongation at Break |
GB/T 1040 |
≥300% |
Tensile Strength after Aging |
GB/T 1040, GB/T 7141 |
≥ |
Elongation at Break after Aging |
GB/T 1040, GB/T 7141 |
≥100% (130℃,168 hrs) |
Hardness (Shore A) |
ISO 868 |
≤90 |
Dielectric Strength |
IEC 60243 |
≥25kV/mm |
Volume Resistivity |
IEC 60093 |
≥1×101 4 Ω·cm |
Dielectric Constant |
IEC 60250 |
≤3.0 |
Longitudinal Shrinkage |
≤10% |
|
Eccentricity |
≤30%(10kV); ≤50%(35kV) |
|
Water Absorption |
ISO 62 |
≤0.5% |
Flammability (Oxygen Index) |
ISO 4589 |
≥28 |
Product No. |
As Supplied/mm |
After Recovered/mm |
|
|---|---|---|---|
Inner diamter |
Inner diamter |
Wall thickness ** |
|
≥3.2 |
≤1.5 |
0.7±0.2 |
|
≥4.8 |
≤2.5 |
0.8±0.2 |
|
≥6.4 |
≤3.5 |
0.9±0.2 |
|
≥9.5 |
≤5.4 |
1.0±0.2 |
|
≥12.7 |
≤7.1 |
1.2±0.2 |
|
≥15.8 |
≤8.7 |
1.3±0.3 |
|
≥19.1 |
≤10.5 |
1.4±0.3 |
|
≥22.2 |
≤12.5 |
1.7±0.3 |
|
≥25.4 |
≤14.5 |
1.8±0.3 |
|
≥31.8 |
≤18.0 |
2.2±0.3 |
|
≥38.1 |
≤21.5 |
2.4±0.3 |
|
**Wall thickness will be less when shrinkage is restricted.
Property |
Test Method |
Typical Performance |
|---|---|---|
Tensile strength(MPa) |
ASTM D 412 |
≥10.3 |
Elongation at Break (%) |
ASTM D 412 |
≥225% |
Tensile stress at 200% elongation (MPa) |
ASTM D 412 |
≤10.3 |
Tensile Strength After Aging (120℃,168 hrs) (%) |
≥8.3 |
|
Elongation at Break after Aging (120℃,168 hrs)(%) |
≥175% |
|
Dielectric Strength (kV/mm) |
ASTM D 2671 |
≥11.8 |
Volume resistivity (Ω·cm) |
ASTM D 876 |
≥1×1011 |
Flammability(Self extinguishing 15 seconds; 3 inches) |
ASTM D2671, Procedure A |
Pass |
Fungus resistance |
ASTM G 21 |
No growth |
Low temperature flexibility |
No cracking |